WineZone Air Handler 5800 Series

Applications:
Used for L-shaped rooms, long narrow rooms, or where one point source will not properly circulate air throughout the room
For cellars that will store or mature wine for long periods of time
Located outside the cellar, the supply and return air is ducted into the room similar to a central air conditioner
No visible mechanical equipment in cellar
Ducted units need only supply registers and return air grilles in the cellar leaving more wall space for racking and art work
Ducting can be placed in soffits if room construction is already complete
The most quiet style of all refrigeration systems
Humidification, dehumidification, and alarm options with the air handler system allow for total climate control in the wine cellar
Accurate, fast acting, commercial controls operate the refrigeration system and all the accessories
Can be used with either an indoor or outdoor remote condensing unit, moving heat and noise away from the cellar
Wooden and decorative metal registers available
Must be installed and adjusted by a qualified HVAC technician

Air Handler:
ETLC listed air handler in accordance with UL1995
Aluminum fin-copper tube coil
Factory balanced, forward curve direct drive blower, with 115V, 3 speed, PSC motor
Cabinet with fully insulated 3/4" fiberglass with an R value of 3.26
1" disposable filters standard on all units
Vertical units have duct connections on return air inlet and a large blower access panel in front
Horizontal units have 3/8" NC thread nuts in each corner of top panel for easy suspension and are designed for top or bottom blower access

Indoor condenser:
UL listed Tecumseh® commercial condensing unit.
Uses R22 refrigerant
Air cooled units standard, water cooled condensers with water regulating valve available for most sizes
Receiver for use with thermostatic expansion valve
4" galvanized iron base
All systems use Alco® pressure controls and refrigerant accessories
Fan cycle control switch
Larger units have dual fan cycle controls, crankcase heater and suction accumulator

Outdoor Condenser:
UL listed Tecumseh® commercial condensing unit.
Uses R22 refrigerant
Air cooled units standard, water cooled condensers with water regulating valve available for most sizes
Receiver for use with thermostatic expansion valve
Rainproof control panel box with liquid tight conduit on control panel
All systems use Alco® pressure controls and refrigerant accessories
Low ambient controls
Fan cycle control switch
Larger units have dual fan cycle controls and suction accumulator
Crankcase heater on all models
Outdoor Enclosure:
UL Listed enclosure
Galvanized steel base
20 GA. Galvanized steel cabinet
Hinged access for easier servicing
Wind safety latch
All season weather protection
Front louvers at 45° angle
Rain trough under hinge to catch moisture that might seep through hinge
Condenser screen protected with high temperature baked-on clear lacquer coating

System 350 Climate Controls:
Johnson Controls was founded in 1885 as a building controls manufacturing and service company. Today, the Controls Group of Johnson Controls, Inc. offers unmatched expertise in how to make non-residential facilities perform better, resulting in improved comfort, safety, energy efficiency and productivity. Johnson Controls is the recognized global leader in creating and managing quality building environments and providing solutions that continually exceed customers' increasing expectations. Johnson Controls designs, manufactures, operates and maintains mechanical and electrical systems that control energy use, heating, ventilating, air conditioning, lighting, and security.

UL listed
Modular electronic control series that includes on/off temperature, humidity and staging applications
Basic system consists of a control module, which accepts stage, display and transformer modules.
All models housed in NEMA 1 high impact enclosures
DIN rail or surface mounted
Remote sensing capability up to 250'
SPDT relay with LED relay indication and an adjustable set point, differential, and offset
5 pin connectors eliminate wiring between modules
Digitally displays actual climate conditions, and set points
Temperature sensor accuracy of ±2°F. Temperature module accuracy of ±3°
Humidity sensor accuracy of ±4%RH. Humidity module accuracy of ±3%RH
Power module accepts 110v or 220v input voltage

Fan Cycle Control:
Contacts open and close by movement of pressure actuated bellows
Provides direct control of AC motors
Full adjustability through all pressure ranges
Hammer blow contact break for long contact life
36 in. cap tube with 1/4" flare nut
100 to 400 psig range with 35 psi differential minimum

Humidification:
Research Products Corporation is the largest manufacturer of whole house humidifiers, air cleaners, and fresh air exchangers and is a recognized leader in the heating and air conditioning industry.
Quiet, efficient performance
Easily installed and maintained
Fan draws air through water panel where humidity is generated and the air handler distributes humidity throughout the cellar
.75 gal/hr capacity, among the highest of all evaporative humidifiers
Could humidify a 4000 sq. ft. home
Simple yearly maintenance can be done by the HVAC tech while performing the yearly maintenance on the refrigeration system
Fast, easy replacement of inexpensive water panel and orifice

Dehumidification:
Duct heater suitable use in any forced air system
Suitable for zero clearance installations in vertical or horizontal duct systems
Easily installed in the side of the supply air duct
Heavy gage galvanized iron construction
Output matched in size to refrigeration unit

Alarm:
24V remote annunciator module
0-60 min internal time delay
85-90 dB piezoelectric horn and LED indicator lights
Mounts in standard electrical handibox
Internal SPDT relay for use with auto-dialers or additional alarm devices
"Silence" push-button for the horn